Active filters
LATEST NEWS
Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.
The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.
The underwater cavitation cleaning machine, powered by a three-phase 380v electric motor. Its quality / price ratio is really unbeatable. Power, reliability and lightness are its strengths.
The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.
The underwater cavitation cleaning machine is powered by a single phase electric motor, ideal for moderate work, where the convenience and accessibility of single phase electricity is a deciding factor.
This cavitation cleaning machine is equipped with a powerful 8 KW Yanmar diesel engine. Standard equipment includes the EVO 2 gun
The cavitation cleaning machine is driven by a powerful and reliable 9.5 kW gasoline engine or Honda engine. Standard equipment includes the Evo2 pistol.
The SM20 submersible pump is self-priming and can run dry without damage. It has the capacity to pump 250 gpm (946 lpm) and move solids up to 8 mm in diameter, making it an extremely powerful and reliable pump.
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump releases no less than 500 gallons per minute (1890 bpm) and its small size allows it to fit into an 11 inch deep by 10 inch square (26.7 cm x 25.4 cm) box.
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in).
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.
Evo2 is the Cavitcleaner cavitation gun capable of removing any type of encrustation, from light encrustation to acorn shells and mussels. The Evo2 is easy to use, easy to use and among its strengths is safe use even for less experienced operators. It is available in several times: S, M, L. It is compatible with most high pressure machines.
The hydraulic chain saw with chain brake in compliance with appendix IV of Directive 2006/42/EC. Without cutting equipment, including hydraulic hoses and water connection hose.
The MC111 rotary tool is designed for cleaning boats, propellers and thrusters. It can be easily carried into recessed areas and niches.
The MC131 is a unique and powerful tool unit designed to clean all types of marine fouling, from smaller yachts and boats to offshore oil and gas platforms. The rotational speed of the brush is adjustable by the diver to achieve an optimum cleaning rate in hours.
The MC212 underwater cleaning unit has a history of over 30 years of service. This tool consists of two halves connected by hinged joints and is designed to clean light and heavy marine fouling from offshore oil and gas platforms, piers, pilings, windmills and other curved structures, as well as medium-sized vessels.
The unique design of the MC313 brush underwater cleaning unit withstands the most difficult underwater cleaning conditions encountered on various types of boats. The downward pressure of the brushes can be adjusted throughout the operation so that hull contours can be cleaned.
Cookie preferences
